Tayana 58



  • Hand laid up FRP hull white, with blue cover stripe & boot top
  • One piece cast iron ballast encapsulated


  • Hand laid up FRP, cored deck, white
  • Molded nonskid on deck and deck house
  • Teak cockpit seats and floor
  • FRP cockpit coaming
  • Aluminum hatches
  • Stainless steel opening ports
  • Swimming ladder, SS mounted on molded swim/dive platform on transom aft
  • Double stainless steel anchor sprit with stainless steel rollers
  • Chain locker & one deckpipe
  • Teak exterior handrails
  • SS stanchions w/ vinyl covered double lifelines w/ gates P&S
  • Aluminum toe rail w/ hawse holes & mooring cleats (six)
  • Dorade bents w/ FRP boxes
  • SS bow pulpit
  • SS stern pulpit
  • Propane locker for two 20 lb tanks, vented overboard
  • Lazaret hatch
  • Two coaming lockers
  • Aluminum mainsheet traveler w/ roller car
  • Aluminum staysail tracks w/ cars
  • Aluminum genoa tracks w/ cars
  • Plexiglas sliding companionway hatch
  • Boomkin (Schooner only)
  • Instrument console mounted on seahood
  • Teak or plexiglas weather boards
  • Teak sundeck aft of cockpit
  • Winches, Lewmar, Cutter:
    Two 66CST jib sheet winches
    Two 54CST secondary sheet winches
    Two 44CST main sheet winches
    One 48CST halyard winch
    One 40CST halyard winch
    One 30CST halyard winch
  • Winches, Lewmar, Staysail Schooner or Ketch
    Two 66CST primaries with handles
    Four 54CST sheet winches
    Two 42CST halyard winches
    Two 30CST topping lift winches


  • Diesel engine, Yanmar, fresh water cooled, 140HP
  • Engine cooling water intake strainer
  • Dripless shaft gland
  • Bronze three blade propeller on 1.5 inch SS shaft
  • Fiberglass drip pan
  • Engine room blower


  • Pedestal steering, Whitlock or equivalent
  • SS 40” destroyer type wheel
  • Teak emergency tiller
  • SS rudder shaft


  • Teak joinery & cabinetry throughout
  • Teak & holly cabin sole
  • Teak veneer in all lockers
  • White formica counters in head & galley
  • Teak framed mirror in head(s)
  • Interior teak handrails
  • V-berth filler if applicable
  • Cloth cushion covers, contoured
  • Ice chest 4” foam, SS lined
  • Interior varnish, polyurethane satin
  • Galley stove alcove, SS lined
  • Easily removable head liner
  • Teak fiddles and teak trim on counters & tables
  • Four inch foam cushions
  • Solid teak doors & frames
  • Engine room sound insulated


  • Aluminum mast(s) & boom (s), mast(s) w/ electrical conduit, decklight(s), & Halyards
  • Standing rigging, stainless steel w/ swaged terminals


  • Mainsail, dacron w/ 2 reef points
  • 100 percent Yankee, dacron
  • Staysail, dacron
  • Sail bags for all sails
  • Sail covers for main sail
  • Staysail schooner rig, two working sails
  • Mizzen with ketch rig


  • Twelve 12V cabin lights overhead & eight reading lights
  • International running lights in accordance with IMCO rules.
  • 12 volt electrical system w/ three way switch, Newmar electric panel w/ breakers, and volt meter & ammeter & 12 volt outlets throughout the yacht.
  • 110 volt electrical system w/ 50 amp shore power plug, Newmar electric panel w/ breaker & volt ammeter, & 110 volt outlets throughout the yacht
  • Two 200 amp hour 12 volt batteries & FRP boxes
  • 12 volt deck flood light(s)
  • 12 volt anchor light
  • Electrical system totally bonded


  • Two 75 gallon mild steel fuel tanks
  • Two SS water tanks, total of 250 gallons
  • Holding tank, FRP, 30 gallons
  • Hot water heater, 110 volt & engine heat exchanger
  • Manual marine heads
  • Hot & cold pressure water system to heads, galley
  • One high capacity manual bilge pump
  • One heavy duty electric bilge pump
  • Bilge pump strainers
  • Sea cocks on all through hull fittings
  • Shower sump tank w/ 12 volt pump